RAC(Ractopamine) Lateral Flow Rapid Test Kit (Tissue, Muscle)
- Catalog Number : LF1002
- Number : LF1002
-
Size:
Qty : - Price : Request Inquiry
-
General Information
| Assay principle | This kit uses the principle of Immunochromatography assay. It can detect Ractopamine (RAC) in samples, such as muscle etc. After adding the sample solution into the sample well of detection card, RAC of the sample solution combine with the gold-labelled antibody, so as to prevent the combining of gold-labelled antibody with RAC conjugate on the cellulose membrane. When the concentration of RAC in the sample solution is more than the detection limit, the detect line do not show color (or shows lighter color than control line) and the result is positive. When the concentration of RAC in the sample solution is less than the detection limit, the detect line show color (shows equal or darker color than control line) and the result is negative. |
|---|---|
| Storage instruction | Store at 2-30℃. With cool and dry environment. |
COMPOTENTS
|
Item |
Specification |
|
Detection card (with pipette) |
50 T/kit |
|
Manual |
1 copy |
Other materials required but not supplied
Instruments: Homogenizer, Water bath, Oscillators, Centrifuge, Graduated pipette, Balance (sensibility 0.01 g).
SAMPLE PRETREATMENT
Restore all reagents and samples to room temperature before use.
- Sample pretreatment Notice:
Experimental apparatus should be clean, and the pipette should be disposable to avoid the experiment result be interfered by the contamination.
- Sample pretreatment procedure:
2.1 Pretreatment of muscle (livestock) sample:
- Weigh 4.0±0.05 g of homogenized fresh sample into a 50 mL centrifuge tube.
- Incubate the tube in boiling water bath (90~100℃) for 10 min. Stand the tube for 10 min to make it cool, then take the supernatant for detection.
Note: Detection limit: 3 ppb
EXPERIMENT PROCEDURE
- Tear the aluminum foil bag of the detection card and take out the detection card, and put it on a smooth, clean table.
- Take the prepared clear sample supernatant with the matching pipette, add 4 drops (about 120 μL) of sample to the sample well (S) vertically and slowly (Avoid foaming).
Incubate for 5 minutes and then judge the results immediately.
.png)